[1] Yanming Liu, Jiahe Li, Alexander J Smits. Roughness effects in laminar channel flow[J], Journal of Fluid Mechanics, 2019, 876: 1129-1145.
[2] Jiahe Li, Yanming Liu, Jiang Wang. Evaluation method of riblets effects and application on a missile surface[J], Aerospace Science and Technology, 2019,95.
[3] Jiahe Li, Yanming Liu, Jiang Wang. Transonic Airfoil Drag Reduction Using Suction and Loaded Leading Edge Control. Journal of Thermal Science. 2021
[4] Yanming Liu, Hong Zhang and Pingchao Liu. Flow control in supersonic flow field based on micro jets[J], Advances in Mechanical Engineering, 2019, 11(1): 1-15.
[5] Li Zhihui, Yanming Liu, Agarwal K. Ramesh. Effect of Nonuniform Tip Clearance on the Performance of Transonic Axial Compressors[J], AIAA Journal of Propulsion and Power, 2018, 34(3): 808-818.
[6] Li Zhihui, Liu Yanming. Optimization of rough transonic axial compressor. Aerospace Science and Technology. 2018, 78: 12-25
[7] Li Zhihui, Yanming Liu, Agarwal K. Ramesh. Robust optimization design of transonic axial compressor considering the manufacturing uncertainties[C]. ASME Turbomachinery Technical Conference & Exposition, 2018.
[8] Li Zhihui, Yanming Liu, Agarwal K. Ramesh. Uncertainty quantification of geometric and flow variables affecting the performance of a transonic axial compressor[C], AIAA Aerospace Sciences Meeting, 2018.
[9] Li Zhihui, Liu Yanming. Blade-end treatment for axial compressors based on optimization method[J], Energy, 2017, 126: 217-230.
[10] Li Zhihui, Yanming Liu. Effect of end-wall roughness on performance of transonic axial compressor, Proceedings of the Institution of Mechanical Engineers[J], Part G, Journal of Aerospace Engineering, 2017, 231(7): 1213-1224.
[11] Zhihui Li, Zheng Xinqian, Liu Yanming, Li Qiushi, Ji Baohua. The effect of end wall boundary layer on matching and corresponding flow control technique for multistage axial compressor, Proceedings of the Institution of Mechanical Engineers[J], Part G, Journal of Aerospace Engineering, 2016, 230(12): 2179-2194.
[12] 马启新, 刘艳明, 潘涛, 阳仕柏, 翟斌. 船舶燃气轮机进气系统中过滤装置数值模型化处理方法研究. 推进技术, 41(11):2475-2482, 2020.
[13] 马启新, 潘涛, 刘艳明, 付宇, 王建华. 船舶燃气轮机双通道进气系统流场特性研究[J]. 工程热物理学报, 2021.
[14] 尚东然，刘艳明. 粗糙度对某多级压气机性能影响的数值模拟研究[J], 推进技术，2019, 40(12):2723-2730.
[15] 尚东然，刘艳明. 斜坡型涡流发生器控制叶栅角区分离的数值研究[J], 空气动力学学报，2018.
[16] 刘艳明，汪亮，尚东然，朱榕，季路成. 基于端壁涡流发生器的压气机叶栅角区分离控制研究[J],推进技术，2019，40(6):1285-1292.
[17] 刘艳明, 秦洋, 王成，姜春晖. 旋转爆轰发动机的有效工作直径设计[J],北京理工大学学报，2017，37(6):573-578.
[18] 刘平超, 刘艳明, 陈思成, 秦洋. 微射流作用下的超声速流场控制机理研究[C], 北京航空航天大学学报，2017，43(7):1491-1500.
[19] 郭龙凯，刘艳明，郑新前，崔庆. 混合型前缘掠对离心压气机气动性能的影响[J], 内燃机学报，2016，34(3):281-287.
